Networks
Example and Test-Networks
In addition, there are several example networks that are described below. The networks were created in STANET as well as in OpenModelica and converted to pandapipes. Each converted network was saved in one json file. Calling the corresponding function loads the results from the json file and saves them as a pandapipesNet. In the case of a STANET net, you can usually choose between the friction models Nikuradse and Prandtl-Colebrook. For OpenModelica the results exist for Prandtl-Colebrook and Swamee-Jain, which approximates the Prandtl-Colebrook formula. In addition, a separate section lists the thermal networks created with OpenModelica that were calculated with Prandtl-Colebrook.
Each network is accompanied by a picture, whereby the following description of the components must be observed:
Schutterwald-Network
pandapipes includes the natural gas distribution network from the supplementary material of [KBLK20]. In this exemplary network, more than 1500 houses and 10 km of pipes with geo-coordinates are included. Further description and figures can be found in the paper. It can be opened by pandapipes.networks.schutterwald()