Heat Transfer Networks¶
This section lists the heat networks generated by OpenModelica. The topologies are not differentiated, since OpenModelica can only create thermal networks to a limited extent. The individual pipes are mainly divided into 5 sections (sections = 5).
Delta¶
Triangular network.
-
heat_transfer_delta()¶ - Returns
net - OpenModelica network converted to a pandapipes network
- Return type
pandapipesNet
- Example
>>> pandapipes.networks.simple_water_networks.heat_transfer_delta()
Delta with 2 Sinks¶
Triangular network with two sinks.
-
heat_transfer_delta_2sinks()¶ - Returns
net - OpenModelica network converted to a pandapipes network
- Return type
pandapipesNet
- Example
>>> pandapipes.networks.simple_water_networks.heat_transfer_delta_2sinks()
Heights¶
Cross-shaped net with height differences between the individual nodes. (sections = 7, for each pipe)
-
heat_transfer_heights()¶ - Returns
net - OpenModelica network converted to a pandapipes network
- Return type
pandapipesNet
- Example
>>> pandapipes.networks.simple_water_networks.heat_transfer_heights()
One Pipe¶
One pipe with a sink.
-
heat_transfer_one_pipe()¶ - Returns
net - OpenModelica network converted to a pandapipes network
- Return type
pandapipesNet
- Example
>>> pandapipes.networks.simple_water_networks.heat_transfer_one_pipe()
One Source¶
Strand net with one source and one sink.
-
heat_transfer_one_source()¶ - Returns
net - OpenModelica network converted to a pandapipes network
- Return type
pandapipesNet
- Example
>>> pandapipes.networks.simple_water_networks.heat_transfer_one_source()
Section Variation¶
Mesh network with different values for “sections” of the four pipes (4, 7, 10, 16).
-
heat_transfer_section_variation()¶ - Returns
net - OpenModelica network converted to a pandapipes network
- Return type
pandapipesNet
- Example
>>> pandapipes.networks.simple_water_networks.heat_transfer_section_variation()
