Circulation Pump Pressure¶
Create Function¶
-
create_circ_pump_const_pressure
(net, from_junction, to_junction, p_bar, plift_bar, t_k=None, name=None, index=None, in_service=True, type='pt', **kwargs)¶ Adds one circulation pump with a constant pressure lift in table net[“circ_pump_pressure”].
- Parameters
net (pandapipesNet) – The net within this pump should be created
from_junction (int) – ID of the junction on one side which the pump will be connected with
to_junction (int) – ID of the junction on the other side which the pump will be connected with
p_bar (float) – Pressure set point
plift_bar (float) – Pressure lift induced by the pump
t_k (float) – Temperature set point
name (str) – Name of the pump
index (int, default None) – Force a specified ID if it is available. If None, the index one higher than the highest already existing index is selected.
in_service (bool, default True) – True for in_service or False for out of service
type (str, default "pt") –
The pump type denotes the values that are fixed:
”p”: The pressure is fixed.
”t”: The temperature is fixed and will not be solved. Please note that pandapipes cannot check for inconsistencies in the formulation of heat transfer equations yet.
”pt”: The pump shows both “p” and “t” behavior.
kwargs (dict) – Additional keyword arguments will be added as further columns to the net[“circ_pump_pressure”] table
- Returns
index - The unique ID of the created element
- Return type
int
- Example
>>> create_circ_pump_const_pressure(net, 0, 1, p_bar=5, plift_bar=2, t_k=350, type="p")
Component Table Data¶
net.circ_pump_pressure
Physical Model¶
Coming soon!
Result Table Data¶
net.res_circ_pump_pressure
Parameter |
Datatype |
Explanation |
deltap_bar |
float |
The pressure lift caused by the pump [bar] |
mdot_kg_per_s |
float |
The mass flow running through the pump [bar] |